Showcase Build Aesthetics with

a Stunning Design

The P40 Prism, with three tempered glass panels,

creates an open feel and enhances your

system build with its modern design

Premium Tempered Glass Panel

Using 4mm thick tempered glass, P40 Prism offers

exceptional durability.

Unobstructed Panoramic View with

3-sided Tempered Glass

A new paradigm in design eliminates the chassis frame, providing an open feeling and unobstructed view.

Tempered glass panels across the front,

sides, and top create a seamless look.

Tool-Free Tempered Glasses

The Front, Side and Top panels can be easily and

completely removed for convenient access to

PC components.

- Top Glass panel Thumb-Screw

- Easy panel management with groove fixing structure at the bottom of the tempered glass

- The new type of conical, tool-less fixing mechanism allows for convenient panel attachment and detachment and is not easily dislodged by normal impact.

Sturdy Triangular Support Structure

The sturdy triangle fixing structure of tempered glass is

able to support a load of 35kgs, ensuring solid stability

for all three glass panels

Full-Mesh Side Panel for

Optimal Airflow

Full-Mesh Side Panel exhaust vent above the

motherboard for optimized airflow.

Additional fans can be installed to dissipate heat

from the rear of the motherboard.

Side : 120mm/ 240mm / 360mm

Rear : 120mm

Rotating PCI slot for GPU

Installation Direction

(Vertical/Horizontal)

Detachable Expansion Cover Available

The expansion cover can be removed to accommodate

the installation of a 360mm liquid cooler.

Efficient Cable Management

with Optimal Routing Design

33mm cable management space helps keep

wires organized.

Convenient cable management layout and

space makes it easier than ever to organize

messy cables for a clean look

Rubber Grommets
for Clean Cable Management

Convenient cable management layout makes it easier

than ever to organize messy cables for a clean look.

Vibrant ARGB Lighting Effect

Stunning and bright ARGB colors shine through the

AF120 presenting your build in the most beautiful

light possible.

Rear : ZM-AF120 ARGB PWM

- Dimensions : 120 x 120 x 26(T)mm

- Rated Voltage :  12V DC (LED: 5V)

- Fan Speed : 600~1,500 ± 10%

- Air Flow : Max. 53.72CFM

- Bearing Type : Hydro Bearing

- Connector : 4-Pin(PWM) / LED 3-Pin(5V)

1. The blade vibration is minimized by preventing the

trembling of the blades during fan operation and the

durability is enhanced

2. Wind noise is minimized by suppressing the vortex

phenomenon that occurs on the blades

3. Airflow is maximized by minimizing the amount

of air flow lost to the outerncircumference

of the rotor

ARGB Controller

RGB control hub and top control button enable variety

RGB effects.

Connect to motherboard 5v RGB pin header to create

various RGB modes.

※ How to use ARGB controller

- Press the I/O LED button to change the LED pattern and color.(26 patterns)

- Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once.

- Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice.

- Press the LED button again to disconnect the

motherboard sync and change the controller mode.

Dedicated GPU Bracket Included

[EVA Foam ]

Bottom Magnetic Dust Filter

Complete Dust Protection

Motherboard Support

Radiator Configuration

Side : 120mm/ 240mm / 360mm

Rear : 120mm

Fan Support

Rear : 1 x 120mm / Bottom : 3 x 120mm

Side 1 : 3 x 120mm / Side 2 : 2 x 120mm

Rear Layout

1. Rear ZM-AF120 ARGB Fan x 1

2. PCI Slot x 7

3. Tool-Free Top cover handle

4. PSU Slot